Measure
Learns each zone's heat-up and cool-down curve.
← All appsIn development
AI HVAC Efficiency Optimizer
Same comfort, smaller bill.
The optimizer models how quickly each zone of your home heats and loses heat, then plans the day's schedule around the forecast, who's home and what electricity costs — keeping rooms comfortable while trimming run time.
Heat-pump homesMulti-zone systemsOlder houses with uneven rooms
What it does
- Per-zone thermal modelling, not a single whole-home guess
- Pre-heats and pre-cools ahead of Halifax weather swings
- Shifts run time away from the most expensive hours
- Detects rooms that never reach setpoint — a sign of a real problem
- Monthly savings report in dollars, not just kilowatt-hours
Preview
Sample optimization
- Pre-heat main floor from 05:40 instead of 06:20 — cheaper hours, same 21°C at wake-up
- Hold bedrooms at 18°C until 20:00 — nobody upstairs before then
- Cold snap tomorrow: start the basement zone 35 minutes earlier
- Estimated this month: 214 kWh saved, about $38
Illustrative example based on a typical HRM home.
How it works
Three simple stages
Plan
Builds tomorrow's schedule from forecast and occupancy.
Report
Shows what the changes actually saved.
Walkthrough
A walkthrough: one winter week
Same comfort, fewer run hours — here's how the schedule is built and what it saved.
- Step 1
Each zone is measured
How fast every zone heats up and loses heat, in your actual house.
On screen
- Main floor — 0.9°C gain per hour at -5°C outside
- Bedrooms — slow to heat, slow to lose
- Basement — draughty, 1.4× the run time
- Step 2
Tomorrow gets planned
Forecast, occupancy and Nova Scotia power rates are combined into one schedule.
On screen
- Pre-heat main floor from 05:40 (cheaper hours)
- Hold bedrooms at 18°C until 20:00
- Cold snap: basement starts 35 min earlier
- Step 3
It watches the result
Rooms that never reach setpoint are flagged as a real problem, not just a schedule miss.
On screen
- 21°C reached at 06:18 — 2 minutes early
- Guest room never passed 19°C — check the vent
- No comfort complaints logged
- Step 4
You see the dollars
A monthly report in money, not kilowatt-hours you have to convert yourself.
On screen
- 214 kWh saved this month
- About $38 off the bill
- Run time down 11%
Pricing
What it costs
Prices in CAD. One-time setup is billed with your install; monthly plans are cancellable any time.
On sale
Launch offer: 70% off for the first 500 customers
Discount applies to every package on every Jara AI app, for the first 500 customers. Regular price shown beside the sale price.
Single zone
$4.20
$14On sale · 70% OFFper month
First 500 customers only
One thermostat, smarter scheduling.
- Thermal modelling for one zone
- Weather-aware pre-heating
- Monthly savings report
Multi-zone
$8.70
$29On sale · 70% OFFper month
First 500 customers only
Every zone planned together around rates.
- Unlimited zones
- Rate-aware run-time shifting
- Underperforming-room detection
- Dollar savings report
Energy audit
$59.70
$199On sale · 70% OFFone-time
First 500 customers only
On-site check before the model goes live.
- Zone and vent inspection
- Heat-pump settings review
- Baseline bill comparison